Stabilizer Bar: Service and Repair

Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking, or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.

Raise the vehicle on a hoist.

2. Remove the wheel and tire assembly.





3. Remove the front stabilizer bar link nuts from the front suspension lower arms.





4. Remove the front stabilizer bar link bolts and remove the front stabilizer bar links.





5. Remove the front stabilizer bar.
1. Remove the four bolts.
2. Remove the front stabilizer bar.
3. Remove the lower suspension arm stabilizer bar insulators.

Installation





1. Follow the removal procedure in reverse order.





2. If equipped with air suspension, lower the vehicle and reactivate the system by turning on the air suspension switch.