Input Shaft Bearing

Special Tools:

Disassembly
1. Inspect the input shaft bearing.





2. Remove and discard the front bearing oil scoop ring.





3. CAUTION: Use of essential tools may cause damage to the bearings being removed.

CAUTION: Hold the input shaft so it does not fall.

NOTE: Only remove bearing if replacement is necessary.

Use (A) Bearing Cone Remover and (B) arbor press to remove the (C) bearing.


Assembly





1. Use (A) Bearing Cone Replacer, (B) Pinion Bearing Cone Remover and arbor press to install the (C) bearing.





2. Install the front bearing oil scoop ring.
- A click should be felt as the front bearing oil scoop ring notches align with the input shaft oil holes.