Front Door

REMOVAL
1. Remove the front door trim panel.
2. Position the watershield aside.






3. Remove the rear glass channel bolt and position the glass channel aside.






4. Disconnect the rods from the door latch.
1. Disconnect the lock cylinder rod.
2. Unclip the locking clip.
3. Disconnect the door lock rod.






5. Position the front door latch aside.
1. Remove and discard the screws.
2. Position the latch aside.






6. Disconnect the electrical connectors.






7. Remove the latch.
1. Disconnect the cable from the latch.

INSTALLATION






1. To install, reverse the removal procedure.
1. If necessary, use Multi-Purpose Grease Spray F5AZ-19G209-AA or equivalent meeting Ford specification ESR-M1C159-A to lubricate the latches.

NOTE: Install the front door latch screw in the small opening first, followed by the large opening.