Bleeding

1. Select maximum heater temperature and blower motor speed settings. Position control to discharge air at A/C vents in the instrument panel.
2. Start engine and allow to idle. While engine is idling, feel for hot air at A/C vents.

3. CAUTION: If the air discharge remains cool and the engine coolant temperature gauge does not move, the engine coolant level is low in the engine and must be filled. Stop the engine, allow to cool and fill the cooling system.

Start the engine and allow to idle until normal operating temperature is reached. Hot air should discharge from the A/C vents. The engine coolant temperature gauge should maintain a stabilized reading in the middle of the NORMAL range and the upper radiator hose should feel hot to the touch.
4. Shut the engine OFF and allow it to cool.
5. Check the engine for coolant leaks.





6. Check the engine coolant level in the degas bottle and fill as necessary.