With Manufacturer's Scan Tool (NGS Tester)

These quick tests should be used to diagnose the Powertrain Control Module (PCM) and should be performed in order.
- Quick Test 1.0-Visual Inspection
- Quick Test 2.0-Set Up
- Quick Test 3.0-Key On, Engine Off
- Quick Test 4.0-Continuous Memory
- Quick Test 5.0-Key On, Engine Running
- Special Test Mode
- Wiggle Test
- Output Test Mode
- PCM Reset Mode
- Clearing DTCs
- OBD II Drive Cycle
- Other NGS Features
- For further information on other diagnostic testing features using the NGS or generic scan tool refer to diagnostic procedures at Powertrain Management. Other diagnostic methods include the following.
- Parameter Identification (PID) Access Mode
- Freeze Frame Data Access Mode
- Oxygen Sensor Monitor Mode