Aft of Axle Tank

REMOVAL
1. Remove the fuel tank.

NOTE
- Narrow frame chassis cab models do have an optional midship 18-gallon steel tank available.
- For diesel engine applications, follow this procedure Steps 1-3 to remove the diesel fuel level sensor.

2. Clean the area around the fuel pump mounting flange.







3. Remove the bolts and lift up on the fuel pump sender flange.

NOTE: The fuel pump module must be handled carefully to avoid damage.







4. Depress the locking tabs on the pump while applying downward pressure on the pump module to release the pump from the mounting bracket. Remove the pump assembly.
5. Remove and discard the mounting flange gasket.

INSTALLATION
1. Clean and inspect the fuel pump mounting flange and the fuel tank mounting surface.







2. Connect the retaining latches of the pump module into the mounting bracket by aligning pump and pushing down until pump is latched on both sides.







3. Install a new fuel pump.
1 Install a new fuel pump mounting gasket and install fuel pump sender flange.
2 Align the fuel pump tubes so they point to the front of the vehicle. Install the bolts.
4. Install the fuel tank.