Dana

Removal
1. Remove the tire and wheel assembly.





2. Remove the anchor plate.





3. Remove the axle shaft.





4. Using a suitable socket, remove the hub nut.





5. Remove the outer rear wheel bearing.
6. Remove the hub and rotor assembly.





7. Remove the rear hub bolts and separate the rear hub from the rear disc brake rotor.
8. Inspect the rear hub for the following:
^ Cracks and damage around the bolt holes.
^ Oversized holes.

Installation








1. NOTE: New rear hub seals must be used when the rear hub is removed. A damaged or worn seal can permit bearing lubricant to reach the brake linings, resulting in ineffective brake operation.

NOTE: Clean and remove any dirt or debris in the rear hub bolt holes.

Follow the removal procedure in reverse order.