Center Support

Special Tools:

Disassembly
1. Using the (A) O-Ring Tool, remove and discard the (B) direct clutch seal rings. Remove the (C) No. 6 center support thrust washer.





2. Inspect the following for contamination or damage. Clean or replace, as necessary.
^ No. 6 center support thrust washer (A).
^ Seal ring grooves (B).
^ Inner hub diameter (C).
^ Outer hub diameter (D).
^ Feedbolt threads ((D).
^ Ball bearing (F).

Assembly
1. Follow the removal procedure in reverse order.
^ Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
^ Install new seals.