Connecting Rod, Engine
| Connecting Rod Bearings | Clearance to Crankshaft- Optimum | 0.001 - 0.0027 |
| Clearance to Crankshaft- Allowable | 0.001 - 0.0027 | |
| Bearing Wall Thickness (STD) | 0.096 - 0.0965 | |
| Main Bearings | Clearance to Crankshaft- Optimum | 0.0011 - 0.0026 |
| Clearance to Crankshaft- Allowable | 0.0011 - 0.0026 | |
| Bearing Wall Thickness (STD) | 0.075 - 0.076 | |
| Connecting RodLength (Center-to-Center) | 5.93 | |
| Alignment (Bore-to-Bore Max. Diff.) The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 105.5 mm on each side of rod centerline. | Twist | 0.0015 - 0.984 |
| Bend | 0.0015 - 0.984 | |
| Piston Pin Bore Diameter | 0.864 - 0.865 | |
| Crankshaft Bearing Bore Diameter | 2.234 - 2.24 |