Wheel Bearing

NOTE: Torque specificatoins are for clean, dirt- and paint-free, dry bolt and nut threads. Never use oil or grease on studs or nuts.

Axle shaft bolts, Dana 70 (1) 143 Nm (105 lb. ft.)
Axle shaft bolts, Dana 135 (1) 133 Nm (99 lb. ft.)
Hub nut, stage 1 95 Nm (70 lb. ft.)
Hub nut, stage 2- back off 90°, then retighten 24 Nm (18lb. ft.)
Maximum hub rotating torque (2) 2.3 Nm (20 lb. in.)

Comments
(1) Apply a suitable thread adhesive
(2) Final adjustment is 0 mm (0 in.) end play