Fuel Line Coupler: Service and Repair

Spring Lock Coupling Disconnect Tool (5/8-Inch):

SPECIAL SERVICE TOOL(S)

DISCONNECT
1. Perform the fuel line venting procedure. Refer to Fuel Line Venting Pressure Relief. Service and Repair







2. Remove the fuel tube clip.







3. Install the Spring Lock Coupling Disconnect Tool.







4. Close and push the Spring Lock Coupling Disconnect Tool into the open side of the cage.







5. Separate the fitting.







6. Remove the Spring Lock Coupling Disconnect Tool.

CONNECT







1. Push together the spring lock coupling fittings until the spring engages.

NOTE:
^ Inspect and clean both coupling ends.
^ Replace the O-ring seals.
^ Lubricate the 0-ring seals with 5W30 engine oil meeting Ford specification WSS-M2C153-G or equivalent prior to installation to help seal and ease the installation.