Trim Panel - Quarter, Right Side

TRIM PANEL - QUARTER, RIGHT SIDE

Removal

1. Remove the rear seats to access the quarter trim panels.







2. Remove the jack stowage cover (regular wagon).
- Lift the jack stowage cover slightly upward and pull away from the body side.







3. Remove the jack stowage cover (extended wagon).
- Lift the jack stowage cover slightly upward and pull away from the body side.







4. Remove the lower rear body side trim panel (extended wagon).
1. Remove the screws.
2. Remove the pushpins.
3. Remove the lower rear body trim panel.

5. Pull the rear door weatherstrip off at the rear door opening to access the trim panel rivets.







6. Remove the rear seat belt shoulder strap covers.
- Pry the seat belt shoulder strap covers upward from the upper trim panels.







7. Remove the window latches, if so equipped.
1. Remove the two screws.
2. Remove the window latch.







8. Remove the upper rear body side trim panel.
1. Remove the rivets.
2. Remove the upper rear trim panel.







9. Remove the upper front body side trim panel.
1. Remove the screw.
2. Remove the upper front trim panel.







10. Remove the lower front body side trim panel.
1. Remove the screws.
2. Lift the lower front trim panel slightly upward, and remove the panel from the body side.

Installation

1. Follow the removal procedure in reverse order.
- Replace any metal clips to the quarter trim panel before installing.
- To install the upper front body side trim panel, start at the front lower corner, then work along the lower edge to the pillar.
- To install the upper rear body side trim panel, start at the front lower portion and work up the pillars.