Sensor, Rear

Removal
1. Raise and support vehicle.





2. Note: C1ean off dirt and debris that may have collected around the rear anti-lock brake sensor before removal.

Remove the rear anti-lock brake sensor.
1 Disconnect the rear anti-lock brake sensor electrical connector.
2 Remove the bolt.
3 Remove the rear ant1 -lock brake sensor.

Installation





1. Note: Thoroughly clean the mounting surface.

Note: Inspect the anti-lock brake sensor O-ring for damage; lightly lubricate the O-ring with SAE-75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.

To install, reverse the removal procedure.