Electrical Specifications

Maximum commutator runout is �0.12 mm (0.005 inch)�. Maximum starting circuit voltage drop (battery positive terminal to start terminal) at normal engine temperature is 0.5 volt�.

Starter Motor Diameter	85 Millimeter (mm)
Starter Motor Current Draw Under Normal Load	230 - 630 Ampere (A)
Normal Engine Cranking Speed	150 - 200 Revolutions Per Minute (rpm)
Minimum Stall Torque @ 2.5 Volts	27.5 Foot Pound-Force (ft.lb)
Maximum Load	2,400 Ampere (A)
No Load (Amps Max)	170 Ampere (A)
Starter Brushes Mfg. Length	18 Millimeter (mm)
Starter Brushes Spring Tension	34 Newton (N)