Inspection and Verification

Inspection and Verification

NOTE: Keep the driver window rolled down during any inspection or pinpoint test to avoid being locked out of the vehicle.

1. Verify the original concern by operating the RKE system to duplicate the concern.

Visual Inspection Chart:

Visual Inspection Chart

2. Before proceeding with diagnosis and testing of the electronic door lock control system electrical operation, check for mechanical binds in the door locks. Operate all door locks several times and check the lock operation. Refer to Power Locks. Also be sure the battery is fully charged. Refer to Charging System.
3. If the concern remains after the inspection, determine the symptom(s) and proceed to Symptom Chart. Symptom Related Diagnostic Procedures