Main Climate Control

REMOVAL
1. Remove the battery.







2. Remove the battery tray.
1 Remove the screws.
2 Remove the battery tray.







3. Move the suction accumulator/drier.
1 Remove the three screws.
2 Move the suction accumulator/drier.

NOTE: This step must be performed if the vehicle is equipped with an A/C system.







4. Remove the blower motor.
1 Disconnect the electrical hardshell connector.
2 Remove the blower motor housing tube.
3 Remove four screws.
4 Remove the retaining clip.
5 Remove the blower motor.

NOTE: To ease removal, align the flat spot on the blower motor mounting plate with the accumulator.







5. Remove the blower motor wheel.
1 Remove the retaining clip.
2 Remove the blower motor wheel.

NOTE: Note the location of the blower motor wheel on the blower motor.

INSTALLATION







1. Follow the removal procedure in reverse order.