40/20/40

REMOVAL
1. Remove the driver and passenger seats. For additional information, refer to Seat-Captain's Chair.







2. Remove the center seat mounting bolt from right side rear mounting bracket.







3. Remove the center seat retaining nut from left side rear mounting bracket.
4. Remove the seat.

INSTALLATION







1. Follow the removal procedure in reverse order.
^ Make sure the safety belt webbing is not twisted prior to installation.

NOTE:
^ When installing the seat, tighten the front mounting bolts, then the rear mounting bolts or nuts.
^ Make sure the safety belt anchor is positioned over the stud before securing the nut.







2. Check the restraint system for correct operation.