Front Bench

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the front safety belts from the front seat. For additional information, refer to Seat Belt Systems.







3. Remove the front seat.
1 Remove the two front seat riser support-to-floorpan bolts.
2 Remove the front seat riser-to-floorpan nuts.
3 Disconnect the safety belt electrical connector.
4 Remove the front seat.

NOTE: Removing the front seat requires more than one technician.

INSTALLATION







1. Follow the removal procedure in reverse order.
^ Adjust the seat to the full forward and rearward positions a few times to assure safety belt and buckle accessibility.
^ Make sure the safety belt webbing is not twisted prior to installation.

NOTE: When installing the seat, tighten the front mounting bolts, then the rear mounting nuts.

2. Check the restraint system for correct operation.