Second Row

REMOVAL







1. Position the seat rearward and remove the bolts.

NOTE: The passenger seat is shown. The driver's seat is similar.







2. Position the seat forward and remove the bolts.

INSTALLATION
1. On the 40 percent seat, install the left and right front bolts, then position the seat forward and install the rear bolts.
2. On the 60 percent seat, install the right front bolt, then the left front bolt.
^ Make sure the safety belt webbing is not twisted prior to installation.

NOTE: When installing the 60 percent seat, be sure to position the safety belt and buckle through the cavity in the seat cushion before tightening the bolts.

3. Position the seat forward and install the rear bolts.
^ Adjust the seat to the full forward and rearward positions a few times to assure safety belt and buckle accessibility.
4. Check the restraint system for correct operation.