Auxiliary Climate Control

REMOVAL
1. Remove the third row seat.
2. Position the RH quarter trim panel aside.







3. Remove the fasteners and remove the lower air duct.







4. Remove the mode door actuator.
1 Disconnect the connector.
2 Remove the screws.
3 Remove the mode door actuator.







5. Remove the heater core cover.
1 Remove the 8 screws.
2 Remove the heater core cover.







6. Gently disengage the upper pivot and remove the mode door.


INSTALLATION

NOTE: Make sure to correctly assemble and seal the air conditioning and heater assembly to allow efficient operation of the auxiliary climate control system.







1. Align the upper pivot and install the mode door.

NOTE: The mode door lower pivot is beveled to ease installation.

2. Install the heater core cover and 8 screws.
3. Install the mode door actuator.
4. Install the lower air duct and fasteners.
5. Install the RH quarter trim panel.
6. Install the third row seat.