Output State Control (OSC) Procedures

-Carry out visual inspection and vehicle preparation as required.
-Select "Vehicle and Engine Selection" menu.
-Select appropriate vehicle and engine.
- Select "Diagnostic Data Link."
- Select "Powertrain Control Module."
- Select "Output Test Mode."
- Select " KOEO On-Demand Self Test and KOER On-Demand Self Tests."
- Carry out test and record DTCs.
- Repair all NON-Transmission DTCs.
- Repair all digital TR Sensor DTCs.
- Repair all vehicle speed DTCs.
- Ensure that the vehicle speed sensor and digital TR Sensors are functional.
- Select " Active Command Modes."
- Select "Trans - Bench Mode or Trans - Drive Mode."