Rear Seat Backrest - Supercab

REMOVAL
1. Fold down both rear seat cushions.







2. Remove the rear seat back.
1 Push the wire hooks rearward to disengage the seat backrest from the back panel of the cab.
2 Lift the rear seat back upward and remove.

INSTALLATION
1. Align the upper hooks with the upper brackets on the back panel of the cab.
2. Route the rear center safety belt through the retainer strap on the rear seat back.

NOTE: Make sure the safety belt webbing is not twisted.

3. Place the lower hooks behind the lower brackets on the back panel of the cab.
4. Lower the seat back until the lower hooks engage the lower brackets.
5. Verify all three upper hooks have engaged the upper brackets.
6. Check the restraint system for correct operation.