Engine, Cooling and Exhaust: Technical Service Bulletins

• Customer Interest
  • Cooling System - Intake Manifold Gasket Leak
  • Engine - Rough Idle/Noise When Cold
  • Engine - Oil Leak From R/H Cylinder Head Gasket
  • A/T Cooler - Fluid Leaks at Radiator
  • A/C - Heater Core Electrolysis/Leakage
  • Exhaust System - Broken Exhaust Manifold Studs
• By Symptom
  • Abnormal wear/deterioration
    • A/C - Heater Core Electrolysis/Leakage
    • Exhaust System - Broken Exhaust Manifold Studs
  • Customer Interest
    • Cooling System - Intake Manifold Gasket Leak
    • Engine - Rough Idle/Noise When Cold
    • Engine - Oil Leak From R/H Cylinder Head Gasket
    • A/T Cooler - Fluid Leaks at Radiator
    • A/C - Heater Core Electrolysis/Leakage
    • Exhaust System - Broken Exhaust Manifold Studs
  • Leaks
    • Cooling System - Intake Manifold Gasket Leak
    • Engine - Oil Leak From R/H Cylinder Head Gasket
    • A/T Cooler - Fluid Leaks at Radiator
    • A/C - Heater Core Electrolysis/Leakage
  • Noise
    • Engine - Rough Idle/Noise When Cold
    • Exhaust System - Catalytic Converter Ticking/Knocking
• All Technical Service Bulletins
  • Driveability - Vacuum Leak Detection
  • Aluminum Engine - New Cleaners/Service Tips
  • Cooling System - Intake Manifold Gasket Leak
  • Engine - Rough Idle/Noise When Cold
  • Engine - Aluminum Block/Head Machining
  • Engine - Cylinder Head Straightedge Surface Check
  • Engine - Oil Leak From R/H Cylinder Head Gasket
  • A/T Cooler - Fluid Leaks at Radiator
  • Emissions/Engine Controls - Driveability Diagnosis
    • Overview
    • Index
      • Information
      • A. Description of Terms and Acronyms
      • B. HO2S Location Diagrams
      • C. Heated Oxygen Sensor (HO2S) Monitor
      • D. Catalyst Efficiency Monitor
      • E. Fuel System Monitor
      • F. Diagnostic Service Tips
  • Exhaust System - Catalytic Converter Ticking/Knocking
  • Engine Head Gasket - Approved Replacement Procedures
    • Overview
    • Service Procedure
      • Aluminum Cylinder Head - Removal From Engine
      • Inspection For Damage and Cleaning Procedure
      • Installation Onto the Cylinder Block Surface
  • Engine Coolant - Propylene Glycol Recommendations
  • Engine - Oil System Priming Procedures
  • Engine - Reman Engine Head Gasket Identification
  • A/C - Heater Core Electrolysis/Leakage
  • Exhaust System - Broken Exhaust Manifold Studs