Supercharger Bypass Vacuum Solenoid Actuator

REMOVAL







1. Remove the two actuator bolts.







2. Remove the actuator.
^ Align the actuator rod with the slot in the linkage.

INSTALLATION







1. Install the actuator adjustment tool onto the actuator, making sure that the tool is correctly attached to the actuator rod. Rotate the actuator into position until the rod engages the lever.

CAUTION: The actuator adjustment tool included with the replacement actuator kit must be used when installing the supercharger bypass valve actuator. Failure to correctly adjust the actuator will result in incorrect operation of the supercharger assembly.







2. Install the actuator.
^ Align the actuator rod with the slot in the linkage.







3. Install the two actuator bolts.
4. Remove the actuator adjustment tool