Cylinder Block Assembly: Specifications
| Diameter-Surface Finish (RMS) | 0.2 - 0.6 |
| Diameter-Out-Of-Round Limit | 0.0006 |
| Diameter-Out-Of-Round Service Limit | 0.00079 |
| Diameter-Taper Service Limit | 0.00023 |
| Head Gasket Surface | B Head Gasket Surface - wt = 10.0/2.5 Head GasketSurface Finish-RZU - 13.5 Microns. Filter Cut Off At 0.08 mm, tpi (@ 3.5 Microns Below The Peak 63% Min. Cutoff At 0.8 mm, 0 Ref=2V. |
| Head Gasket Surface Finish | B Head Gasket Surface - wt = 10.0/2.5 Head GasketSurface Finish-RZU - 13.5 Microns. Filter Cut Off At 0.08 mm, tpi (@ 3.5 Microns Below The Peak 63% Min. Cutoff At 0.8 mm, 0 Ref=2V. |
| Main Bearing Bore Diameter | 2.85 - 2.851 |