Conventional

REMOVAL
1. Remove the headlamp switch. For additional information, refer to Lighting and Horns.

CAUTION:
^ Prior to removal of module, it is necessary to upload module configuration information to the scan tool. This information needs to be downloaded into the new module once installed. For additional information, refer to Module Communication Network (Information Bus).
^ Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.







2. Carefully release the four clips and remove the steering column opening cover.







3. Remove the instrument panel finish panel.
1 Remove the bolts.
2 Remove the instrument panel finish panel.







4. Remove the instrument cluster.
1 Remove the bolts.
2 Disconnect the electrical connectors.
3 Remove the instrument cluster.
^ If equipped, remove the transmission range indicator.
^ If equipped, disconnect the boost gauge vacuum line.

INSTALLATION












1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the scan tool into the new module. For additional information, refer to Module Communication Network (Information Bus).