Inlet

REMOVAL







1. Open the (A) air cleaner clamp and set the (B) Outlet Air Cleaner (ACL) aside.







2. Lift the (B) open end of the (A) inlet air cleaner until free of the (C) air cleaner support insulators.


3. Pull the inlet air cleaner away from the inner fender.

CAUTION: The inlet air cleaner should be removed as an assembly. Do not separate the air cleaner from the fender inlet tube during removal or installation.

INSTALLATION







1. To install, reverse the removal procedure.

CAUTION: The air cleaner outlet tube should be securely sealed to prevent unmetered air from entering the engine.

NOTE: The inlet air cleaner has an alignment tab which fits into a slot on the outlet air cleaner. Make sure the tabs are aligned correctly.