Disc Check

Special Tools:

1. Remove clutch assembly.





2. Note: Use emery cloth to remove minor imperfections in the clutch disc lining surface.

Inspect clutch disc for:
^ Oil or grease saturation.
^ Worn or loose rivets at the hub.
^ Broken springs.
^ Wear or rust on splines.
Replace the clutch disc if any of these conditions are present.





3. Use a slide caliper to measure the depth to the rivet heads.
^ Replace the clutch disc if not within specification.





4. Use (A) Dial Indicator/Magnetic Base to inspect the (B) clutch disc runout.
^ Replace the clutch disc if not within specification.