Tests FD: Brake Pedal Position (BPP) Switch

NOTE
This Pinpoint Test is intended to diagnose the following:
- Brake Pedal Position (BPP) switch
- Harness circuits: B+, BPP, GND and stoplamp PWR
- Powertrain Control Module (PCM)

Pinpoint Test Schematics

LS6/LS8 (BPP):

Continental, Town Car, and Windstar (BPP):

The PCM receives BPP information through the SCP link. This pinpoint test will only verify Self-Test was performed correctly. For detail wiring information, refer to the component or Wiring Diagrams.

Explorer/Mountaineer/Ranger (BPP):

All Others (BPP):

Pinpoint Tests