Dana S135

Rear Drive Axle and Differential

Dana Model S135 Full-Floating Drive Axle:

Dana Model S135 Full-Floating Drive Axle

Identification Tags (Part 1):

Identification Tags (Part 2):

Identification Tags

Gear Set Identification (Part 1):

Gear Set Identification (Part 2):

Gear Set Identification

- The trademark shows the company logo, and identifies the location of the manufacturing facility.

- CAUTION: Never mate a differential ring gear and pinion together that does not have the same matched set numbers. Always install a new matched set if discarding either the differential ring gear or the pinion.

A corresponding number marked on the differential ring gear and pinion identifies them as a matched set.
- The manufacturer's date identifies the gear set's date of fabrication.
- The tooth combination identifies the number of teeth on the pinion and the number of teeth on the differential ring gear. A tooth combination of 41-11, for example, would indicate that the pinion has 11 teeth and the ring gear has 41 teeth that results in a 3.73:1 ratio.

Dana Model S135 Full-Floating Rear Axle, Disassembled View (Part 1):

Dana Model S135 Full-Floating Rear Axle, Disassembled View (Part 2):

Dana Model S135 Full-Floating Rear Axle, Disassembled View