Rear

Bar and Link - Super Duty F-450, F-550, Dana Axle

Removal

CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during re-assembly to ensure proper retention of these parts.

1. Raise and support the vehicle.






2. Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.






3. Remove the nuts and washers from both upper ends of the stabilizer bar links-to-frame and remove the links.






4. Remove the bolts from both stabilizer bar retainer-to-axle brackets and remove the stabilizer bar.

Installation










1. Using new fasteners, follow the removal procedure in reverse order.