Captain's Chair

DISASSEMBLY
1. Remove the seat. For additional information, refer to Seat-Captain's Chair.
2. Remove the seat safety belt buckle. For additional information, refer to Seat Belt Systems.
3. If equipped, remove the seat control switch. For additional information, refer to Switch.
4. If equipped, remove the armrest. For additional information, refer to Armrest-Captain's Chair.
5. Remove the seat back. For additional information, refer to Seat Backrest-Captain's Chair.







6. On all seats, remove the two seat risers.
1 Remove the four nuts.
2 Remove the two seat risers and the support bracket.







7. Remove the seat track.
1 Remove the four bolts.
2 Remove the front seat track.

NOTE: On the power seat, remove the seat track and motor as an assembly.







8. Unfasten the seat back cover J-strip and remove the cover.







9. On the manual seat, remove the seat track release bar.
1 Remove the two screws from the inboard seat track release bar.
2 Remove one screw from the outboard seat track release bar.
3 Remove the seat track release bar.







10. On all seats, unfasten the four front seat cushion cover J-strips.







11. Remove the two seat cushion pad pushpins.







12. Remove the seat cushion pad from the seat cushion frame.

ASSEMBLY
1. Follow the disassembly procedure in reverse order.







2. On the manual seat, install the seat track release bar.
1 Position the manual seat track release bar to the front seat track.
2 Install the three bolts.







3. Install the seat track.
1 Install the seat track to the seat frame.
2 Install the four bolts.

NOTE: On the power seat, install the seat track and motor as an assembly.







4. On all seats, install the seat risers and tighten to specification.
1 Install the two seat risers and support bracket.
2 Install the nuts.

NOTE: When installing the seat risers, make sure the seat belt buckle bracket is on the inboard rear seat riser.