Seat - Rear, Four-Door, Supercab

Safety Belt Bolt Bit:

SPECIAL SERVICE TOOL(s)

REMOVAL







1. Remove the rear seat trim covers.
1 Remove the outboard seat anchor trim cover.
2 Remove the inboard seat anchor trim cover.







2. Remove the rear safety belt retractor.
1 Use Safety Belt Bolt Bit to remove the bolt.
2 Remove the retractor.







3. Remove the rear seat.
1 Remove the bolts.
2 Remove the seat.

INSTALLATION












1. To install, reverse the removal procedure.
^ Use Safety Belt Bolt Bit to install the safety belt retractor bolt.

2. Check the restraint system for correct operation.