Cylinder Head Assembly: Specifications

ENGINE GENERAL SPECIFICATIONS


























Footnotes:
a. Measure on skirt 40mm (1.57 in) down from face of piston dome.
b. Use bore measurement perpendicular to crank centerline.

TIGHTENING SPECIFICATIONS

Use new cylinder head bolts.

Follow the removal procedure in reverse order.





Tighten the bolts in sequence, in three stages, to 70 Nm (51 ft. lbs.).
- Stage 1: Tighten all bolts to 70 Nm.
- Stage 2: Retighten all bolts to 70 Nm.
- Stage 3: Tighten all bolts an additional 90 - 100°.