One Piece Cable

REMOVAL

A4 - A5:

1. Remove the radio chassis. For additional information, refer to Radio, Stereo, and Compact Disc.







2. Position the antenna lead-in cable.
1 Open the glove box door.
2 Release the tabs and lower the glove box to the full open position.
3 Disconnect the antenna lead-in cable wire clip.
4 Push the rubber grommet through the sheet metal and feed the antenna lead-in cable through the hole.







3. Remove the radio antenna mast.
^ Remove the radio antenna mast by turning it counterclockwise.







4. Unsnap and remove the radio antenna base cap.







5. Remove the antenna base and lead-in cable assembly.
1 Remove the screws.
2 Remove the antenna base and lead-in cable assembly.







6. Position aside the antenna lead-in cable.
1 Lift out the antenna base.
2 Disconnect the lead-in cable.
3 Push the rubber grommet through the sheet metal and feed the antenna lead-in cable through the hole.

INSTALLATION












1. To install, reverse the removal procedure.