Two Piece Cable

REMOVAL







1. Remove the radio antenna mast.
^ Remove the radio antenna mast by turning it counter clockwise.







2. Unsnap and remove the radio antenna base cap.







3. Remove the screws.
4. Remove the front fender apron.







5. Remove the antenna lead-in cable.
1 Open the glove box door.
2 Release the tabs and lower the glove box to the full open position.
3 Unclip the antenna lead-in cable wire clips.
4 Disconnect the antenna lead-in cable.
5 Pull the antenna lead-in cable through the hole and remove the remove the antenna lead-in cable.

6. Remove the antenna assembly through the wheel well.

INSTALLATION












1. To install, reverse the removal procedure.