Base, Front Bucket, 40 Percent Seat

DISASSEMBLY

NOTE: Do not attempt this procedure unless replacement plastic rivets are available.

1. Disassemble the front bucket seat; refer to Seat-Front Bucket, 40 Percent Seat.







2. Disconnect the seat base trim from the frame.
^ Remove and discard the rivets.







3. Remove the seat cushion trim.
^ Disconnect the seat trim from the hook and loop strips.

CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strips or the hook and loop strips may be torn from the seat cushion foam.

ASSEMBLY
1. To assemble, reverse the disassembly procedure.
2. Check the restraint system for correct operation.