Parameter Identification (PIDs)

Restraints Control Module (RCM) Parameter Identification (PID) Table

To retrieve PIDs, follow these steps:
1. Connect the scan tool to Data Link Connector (DLC).
2. Turn the ignition switch to the RUN position.
3. Follow manufacturer's instructions for the scan tool being used.
4. PIDs are continuously updated on the display.

The PID/Data Monitor and Record option allows the scan tool operator to read the state of several Parameter IDs (PIDs) to aid in diagnosing the system. PIDs are real time measurements of parameters such as voltages, resistances, etc., calculated by the Restraints Control Module (RCM) and sent to the scan tool for display. Many of the PIDs supported by the RCM are calculated periodically and are, therefore, not true real time readings. The following is a table of supported PIDs, expected range and units of measurement.