Front

4X2

Removal
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assembly.





3. Remove the front stabilizer bar link nuts from the front suspension lower arms.





4. Remove the front stabilizer bar link bolts and the front stabilizer bar links.





5. Remove the front stabilizer bar.
1. Remove the four bolts and two brackets.
2. Remove the front stabilizer bar.
3. Remove the stabilizer bar insulator.

Installation

Note: In the event the self-tapping bolts cannot be installed in the frame, there is a kit available with flag nuts; consult your parts department for further information.








1. Follow the removal procedure in reverse order.