System Specifications
| Head Gasket Surface Flatness | 0.003 in. in 6.00 in. | |
| Head Gasket Surface Flatness (RMS) | 1.0 - 3.3 Micro-Meters (micro-m) | |
| Cylinder Bore | Diameter | 3.504 Inch (in) |
| Surface Finish (RMS) | 0.45 - 0.96 Micro-Meters (micro-m) | |
| Out-of-round Limit | 0.001 Inch (in) | |
| Out-of-round Service Limit | 0.002 Inch (in) | |
| Taper Service Limit | 0.002 Inch (in) | |
| Main Bearing Bore Diameter | 2.713 Inch (in) | |
| 2.712 Inch (in) | ||
| Tappet Guide Plate-to-cylinder Block | 9 Foot Pound-Force (ft.lb) | |
| Oil Pan-to-cylinder Block Bolts | See procedure |