Flushing

Flushing - Engine End Radiator





Special Tool(s)

1. WARNING: To avoid personal inky, not unscrew the coolant pressure relief cap Flails the engine is operating or hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly.

Once pressure is released, remove the pressure relief cap.
Drain the cooling system.
2. Remove the water thermostat.
3. Install the water hose connection without the water thermostat.

4. NOTE: Refer to the cooling system Flush-All Operating Instructions for specific vehicle hook-up.

Use cooling system Flush-All, Flush Kit Hardware Package and Drain Kit to flush the engine and radiator.
Use Ford Premium Cooling System Flush F1AZ-19A503-A meeting Ford specification ESR-M14P7-A with standard (green) cooling system.
5. Install the water thermostat.
6. Backflush the heater core if necessary.
7. Fill the cooling system.