General Module: Service and Repair

REMOVAL

CAUTION: Prior to removal of the GEM, it is necessary to upload module configuration information to a diagnostic tool This information needs to be downloaded into the new module once installed.

1. Disconnect the battery ground cable.







2. Remove the instrument panel steering column cover.
1 Unlock the retainers.
2 Remove the instrument panel steering column cover.

CAUTION: Use care when removing the instrument panel steering column cover or damage to the cover locating tab may occur.







3. Disconnect the bulkhead connectors from the instrument panel fuse junction panel.
1 Loosen the bolts.
2 Disconnect the bulkhead connectors.







4. Position the instrument panel fuse junction panel aside.
1 Remove the nuts.
2 Remove the bolts.







5. Remove the GEM.
1 Disconnect the electrical connectors.
2 Remove the screws.
3 Remove the GEM.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Once the new GEM is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.