| Main Bearing Journal Diameter | | 67.483-67.503 mm |
| Maximum Out-of-Round (Between Cross Sections) | | 0.0075 mm |
| Maximum Taper | | 0.004 mm |
| Runout: FIM of Center Journals When Located on Front and Rear Journal | | 0.05 mm (3 places) |
| Clearance - Crankshaft Journal to Main Bearing Clearance | | 0.048-0.024 mm |
| Crankshaft End Play | | 0.075-0.377 mm |
| Crankshaft Main Bearing Bolts (Cross-Mounted) | | 21 Nm (15 ft.lb) |
| Crankshaft Main Bearing Bolts (Vertical) | Stage 1 | 40 Nm (30 ft.lb) |
| Stage 2 | Additional 85-95 degrees |
| Jack Screws | Stage 1 | 5 Nm (44 in.lb) |
| Stage 2 | 10 Nm (89 in.lb) |