Rear

Removal

1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.

Raise and support the vehicle.





2. Remove the stabilizer bar link nut.





3. Remove the stabilizer bar link bolt and the stabilizer bar link.





4. Remove the stabilizer bar from the rear axle.
1 Remove the stabilizer bar retainer bolts.
2 Remove the stabilizer bar retainers and the stabilizer bar.

Installation











1. To install, reverse the removal procedure.