Visual Inspection

Visual Inspection
This inspection will identify modifications or additions to the vehicle operating system that may affect diagnosis.
Inspect vehicle for non-Ford approved add-on devices such as:
- Electronic add-on items
- Air conditioning.
- Generators (alternators).
- Engine turbos.
- Cellular telephones.
- Cruise controls.
- CB radios.
- Linear amplifiers.
- Backup alarm signals.
- Electronic brakes for trailer towing.
- Computers.

- Vehicle modifications.

These items, if not installed correctly, will affect Powertrain Control Module (PCM) or transmission function. Pay particular attention to add-on wiring splices in the PCM harness or transmission wiring harness, abnormal tire size or axle ratio changes. Leaks; refer to Leakage Inspection.

Shift Linkage Check
Check for a misadjustment in shift linkage by matching the detents in the transmission range selector lever with those in the transmission. If they match, the misadjustment is in the indicator. Do not adjust the shift linkage.

Hydraulic leakage at the manual control valve can cause delay in engagements and/or slipping while operating if the linkage is not correctly adjusted.

Carry Out On-Board Diagnostics (KOEO, KOER)
After a road test, with the vehicle warm and before disconnecting any connectors, carry out the Quick Test using the scan tool.