Operation CHARM: Car repair manuals for everyone.
Home >> Ford Truck >> 2001 >> Explorer 2WD V6-4.0L VIN E >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Chain Tensioner >> Service and Repair >> Timing Drive Components - Hydraulic Chain Tensioner, LH

Timing Drive Components - Hydraulic Chain Tensioner, LH



NOTE: Ford does not provide timing marks or additional information for servicing of the timing chains/sprockets without the special tools listed in this procedure.

Timing Drive Components-LH Hydraulic Chain Tensioner

Removal and Installation

1. Remove the upper intake manifold.
2. Remove the thermostat housing.






3. Remove the LH camshaft tensioner.
- If using a new washer, tighten to 44Nm (32lb-ft).
- If using the old washer, tighten to 67Nm (49 lb-ft).






4. Remove the pipe plug, and the oil volume reduction plug.

5. NOTE: Be sure to install the new oil volume reduction plug supplied with the hydraulic chain tensioner.

To install, reverse the removal procedure.
pro multis · About Operation CHARM