Disc Check

Special Tools:

1. Remove the clutch assembly.

2. Note: Use emery cloth to remove minor imperfections in the clutch disc lining surface.

Inspect the clutch disc for:
- oil or grease saturation.
- worn or loose facings.
- warpage.
- broken springs.
- wear or rust on the splines.
- replace the clutch disc if any of these conditions are present.

3. Note: The clutch disc and pressure plate should always be replaced as an assembly.

Use (A) Dial Indicator/Magnetic Base to inspect the (B) clutch disc runout.
- Replace the clutch disc if not within specification.