Radiator: Service and Repair

Removal

1. Drain the cooling system.
2. Remove the air cleaner outlet tube.





3. Position the (A) overflow tube clamp back and disconnect the (B) radiator overflow tube from the (C) radiator filler neck.
4. Remove the fan shroud.





5. Position the hose clamp back and disconnect the upper radiator hose from the radiator.





6. Position the hose clamp back and disconnect the lower radiator hose.





7. Disconnect the two transmission cooling lines, if equipped.





8. Remove the two bolts.
9. Lift the radiator up and remove from the vehicle.

Installation





1. Position the radiator onto the lower radiator support rubber insulators and install the two bolts.





2. Connect the transmission cooler lines, if equipped.
- Make sure the transmission fluid is at the correct level.





3. Position the lower radiator hose and slide the clamp forward.





4. Position the upper radiator hose and slide the clamp forward.
5. Install the fan shroud.





6. Connect the (B) radiator overflow hose to the (C) radiator filler neck and position the (A) clamp.
7. Install the engine air cleaner outlet tube.
8. Fill the cooling system.