| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Diagnose/Test |
| Oil Leak, Diagnosis | 1.0 | 0.5 | C | |
| Replace |
| Complete Assembly Without Transfer Of Parts |
| Manual Trans | 10.1 | 7.2 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment. |
| Auto Trans | 9.1 | 6.6 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment. |
| Complete Assembly With Transfer Of Parts |
| Manual Trans | 12.6 | 10.5 | B | Includes: Transfer All Fuel & Electrical Units. Does Not Include: Transfer Of Optional Equipment. |
| Auto Trans | 11.6 | 9.9 | B | Includes: Transfer All Fuel & Electrical Units. Does Not Include: Transfer Of Optional Equipment. |
| Long Block |
| Auto Trans | 15.6 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components Not Supplied With Long Block. |
| Manual Trans | 16.6 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components Not Supplied With Long Block. |
| Short Block |
| Manual Trans | 19.6 | 11.7 | A | Includes: R&I Engine And Replacement Of Necessary Components. |
| Auto Trans | 18.6 | 11.1 | A | Includes: R&I Engine And Replacement Of Necessary Components. |
| NOTE |
| To Grind Valves, Add |
| One Bank | 2.3 | 1.9 | A | |
| Both Banks | 4.4 | 3.7 | A | |
| Overhaul/Rebuild |
| Auto Trans | 28.6 | 0.0 | A | Includes: Disassemble & Clean Engine, Ridge Ream & Hone Cylinders, Fit Pistons, Rings, Pins, Main & Rod Bearings, Grind Valves & Tune-Up |
| Manual Trans | 29.6 | 0.0 | A | Includes: Disassemble & Clean Engine, Ridge Ream & Hone Cylinders, Fit Pistons, Rings, Pins, Main & Rod Bearings, Grind Valves & Tune-Up |