Keyless Entry Key-Pad: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door trim panel.


CAUTION: Do not operate the radio chassis with a radio speaker disconnected.







3. Remove the screws and lift the radio speaker out to gain access to the electrical connector.







4. Disconnect the speaker wiring connector.







5. Disconnect the electrical connector.
- Release harness pin-type retainers.







6. Remove the keyless entry keypad and harness.
1 Remove the clip.
2 Remove the keyless entry keypad and harness.


INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 10 miles (16 km) or more to relearn the strategy.